September 1999 - USR-TC - mailman.xmission.com

(usr-tc) Disconnecting Connections
by Interests 17 Feb '00

17 Feb '00

I am trying to find the command to disconnect a particular connection on a TC. Anyone know off the top of your heads? Jason A. Nunnelley President of Linkfast Inc. "I always respond to E-mail" PO BOX 202 Cullman AL 35056 256-739-2008 Voice 770-234-5702 Fax Billing and Office Hours: 9am - 9pm Monday through Friday Tech Support Hours: 9am - 9pm Monday through Friday 9am - 5pm Saturday Support Online: http://linkfast.net/support.html - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

8 10

RE: (usr-tc) Netserver problem
by Scott Trautman 08 Oct '99

08 Oct '99

Anything on the console port? Bootup messages? (actually don't think you would see those if I recall correctly, just a login prompt when it is up...) Get out the pcsdl, source and re-upload it via serial cable. Hint: set your serial port to at least 57600 w/dip switches. Sounds like your flash got corrupted. Or send it back to 3Com and they'll do probably the same thing. SMT > -----Original Message----- > From: Dataheart [mailto:lists@dataheart.net] > Sent: Thursday, September 30, 1999 10:49 AM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Netserver problem > > > Well I'm just full of problems arent I :-D > > I have a Netserver card that once powered up the rn/fl led > flashes green on > and off 13 times, then flashes quickly for a few seconds, > then goes solid green > for a while, then repeast the process. > Anyone know whats going on? > > Thanks, > Aaron > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 5

(usr-tc) DSL
by Mike Wilker 08 Oct '99

08 Oct '99

Does anyone still run the Affinity DSL on their TotalControls? I am trying to set one up that we've had for a year now, but I can't get the command line to come up on the card. Does it use the same console cable as the HiperArcs and NMCs, and is there another way to configure it, say through the Viper DSL? Thanks. Mike Wilker Operations Manager Local Link, Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) testing csu/dsu on DSP
by Jeff Mcadams 04 Oct '99

04 Oct '99

Hi folks... I've got a CSU/DSU on a HiPer DSP that I *think* may be going bad...not really sure though. I'd like to be able to test it, but I'm not really sure how. I've got some equipment that can send BERT patterns at it, but I'm not sure how to set up the DSP to actually deal with that. I've gotten it into a line loopback, so I can bounce the pattern off the loopback, but that's not terribly helpful when you're trying to test the actual CSU/DSU. :/ I've found that the DSP can send, what appears to be a quasi-random signal, but I can't get it to sync up when sending it. My current setup to try to test this is the DSP card is connected via a "null-t1" cable to my other equipment (a Cisco 7507 with a multi-channel port adapter...has integrated CSU/DSU's and ability to run quite a few different BERT patterns...more capability in this area from 3Com would be *really* cool to have ;). I can get the T1's to sync up normally (non-BERT) by setting the clock source on the Cisco to internal (which is expected...*someone* has to generate clock...although it seems they'll coast for a while with both pulling it off the line without falling out of sync). I can also set up a loopback on the DSP, and run anything I want from the cisco and it works (BERT, true T1 signalling, etc.), but I can't reverse it. I have tried setting the cisco to have a loopback and run qrs from the DSP (available via the "cmd sendcode qrs" command on the console) but it never seems to want to sync up that way. I've tried all different combinations of clocking sources on the DSP and cisco with the DSP running qrs, but never can get it to be happy. Anyone have any knowledge about, or experience with, testing a DSP CSU/DSU for problems using BERT patterns and the like? -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Going nowhere fast...
by Jerry Wright 01 Oct '99

01 Oct '99

We had a USR TC box with 48 modems and 2 T1s. It worked... Well, we got our third T1 and a used TC box. Now, about a third of our customers log on, get authenticated, and sit there (ping and traceroute work, web browsing doesn't). Or else, they get an error 750 or 765 or other type error. Could our new T1 NIC card be bad? It passes the various tests? Help!!! Other info, the T1 performance test tells me 3865 bipolar whatever errors in the last 24 hours. Bad card??? US West says the line tests out good. Jerry Wright Internet Access of Moses Lake - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 7

(usr-tc) Pipe 75 + Static IP + NAT
by Marius Strom 01 Oct '99

01 Oct '99

I'm trying to hook up a Pipe 75 with a Static IP and NAT enabled to a HiPerARC chassis.. When I disable the NAT on the Pipe, it connects, when I enable it, it won't connect.. The pipe has been dialing into a Livingston PM2e up until now, and when I modify the remote address and the phone number to have it dial to our TC equipment, it won't do it. I've gone and disabled things such as STAC and all other compressions.. I did set the Pipe to MP with BACP=Yes. Please let me know if you guys have had any success, and if you've got success, let me know how I can have it too *chuckle* Thanks in advance! -- Marius Strom <marius(a)alpha1.net> Professional Geek/Unix System Administrator Alpha1 Internet <http://www.alpha1.net> http://www.marius.org/marius.pgp 0x5645C228 In theory, there is no difference between theory and practice... ...In practice, there is a big difference. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) Quad Digital Modems
by Steve Rivera 30 Sep '99

30 Sep '99

Are the quad digital modems able to handle analog application, as long as nic cards are installed on the chassis. I have customer who is setting up a ISP across seas. He is currently only able to get POT connections, but that is only for now. If he buys the quad digital cards will he ba able to suuport the analog connections now and the digital later. .................................................... Steve Rivera - VP-WR Consultant Associates, Inc. (WRCA) sales(a)wrca.net v-732-833-2111 pgr-732-325-1092 WAN ACCESS SPECIALIST---http://www.wrca.net (CompleteLine Card) Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,Verilink IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal Datacom,GDC,Telebit MultiTech,Sync/Tylink,Wellfleet,BayNetworks(5399),Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) RADIUS Authentication & Accounting
by Dataheart 30 Sep '99

30 Sep '99

Howdy, I am looking for a good RADIUS server for use with both HiPer and Analog Total Control Chassis under linux. I need to have the users file as a table in a PostgreSQL server that contains all the radius attributes that would normally be specified in the users file(this feature is necessary to interact with our accounting system). all users need to be able to be authenticated off the system password e.g. /etc/passwd, and there needs to be an accurate accessible list of the currently logged in users. Similar to the Total Control Security & Accounting Server from 3Com which I am fairly familiar with, but on a Linux platform. I have had a look at Cistron Radius and its PAM, but from the docs it seems to be not quite what I am after. is there something out there or am I living in a dream world. Oh yeah and would like realm support but it is not absolutely essential. Thanks heaps people, Aaron - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Modems
by Startup Suppliers Ltd. 30 Sep '99

30 Sep '99

Hi All! Can someone advise me how Netserver 16 I works. Do I need a portmaster to go with it? Is it an obsolete technology? What are it's problems and disadvantages? Okeyo. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Modems
by Startup Suppliers Ltd. 30 Sep '99

30 Sep '99

Hi All! I need modems in racks for use with PM2E 30 portmasters. I need 100 units 33.6 in racks or something similar. Please respond with best prices. Okeyo - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0