August 1999 - USR-TC - mailman.xmission.com

(usr-tc) DNIS not working on PRI
by Marshall Morgan 17 Aug '99

17 Aug '99

We are using Bellsouth provided PRI's in 6 different cities and cannot seem to get DNIS information sent to us over many of them. Modems are DSP 2.0.81 and DualPRI 3.1.5 on ARC 4.1.59-6. I haved talked to them on many occasions but cannot seem to get anywhere. What should I look to first? The DSP/DPI cards are set at factory defaults and there is no difference in code/settings between city1 and city4 but one works?! Looks like telco to me but I would like to know if over PRI anything else needs to be checked on my side. Any ideas? City1: Calling-Station-Id = "2288977988" Called-Station-Id = "" City2: Calling-Station-Id = "6014854289" Called-Station-Id = "" City3: Calling-Station-Id = "6012667011" Called-Station-Id = "" City4: Calling-Station-Id = "6629632985" Called-Station-Id = "8426002" City5: Calling-Station-Id = "6017316412" Called-Station-Id = "" City6: Calling-Station-Id = "6622366776" Called-Station-Id = "" Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Internic
by Robert von Bismarck 17 Aug '99

17 Aug '99

Yeah, same here, some root servers know about a domain, some don't. They seem out of synch. Little reboot needed I'd say ;-) Robert -----Original Message----- From: Jim Johnson [SMTP:jim@perigee.net] Sent: mercredi, 18. aoÃ»t 1999 15:45 To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Internic I don't think that is what we have been seeing. I miss the status field they use to display on WHOIS. :( Jim Hofmann wrote: > > What we've seen the last couple days has been attributed to folks not paying the internic bill. Go figure, they want you to pay to play :) > > This being my most technically capable mailing list :), I thought I > would ask this off-topic qustion. Has anyone else observed problems > with Internic the last few days. Root servers are timing out, domains > are being dropped off the servers. We had 20 domains yesterday that > were just gone from the root servers that we complained to Internic > about. Today, the list is down to five. Our support people have heard > from people of many domains that have been unreachable the last couple > days. Seems like these widespread problems would have been headline > news. > > Jay Hofmann Email: jayh(a)iglou.com > Technical Support Team Leader Voice: (502) 966-3848 > IgLou Internet Services (800) 436-4456 > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Internic
by Hofmann 17 Aug '99

17 Aug '99

What we've seen the last couple days has been attributed to folks not paying the internic bill. Go figure, they want you to pay to play :) This being my most technically capable mailing list :), I thought I would ask this off-topic qustion. Has anyone else observed problems with Internic the last few days. Root servers are timing out, domains are being dropped off the servers. We had 20 domains yesterday that were just gone from the root servers that we complained to Internic about. Today, the list is down to five. Our support people have heard from people of many domains that have been unreachable the last couple days. Seems like these widespread problems would have been headline news. Jay Hofmann Email: jayh(a)iglou.com Technical Support Team Leader Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) NFAS on DSPs
by Stainforth, Matthew 17 Aug '99

17 Aug '99

I just swapped out a dual PRI card and a set of quads for two DSPs and I'm trying to do NFAS. The telco sees the D channel up and the channels are all supposedly up and idle but the second card is reporting the D channel is down. Is this normal since the D channel is on the first PRI span or does it indicate a problem? At first I had the NFAS ID wrong on the second DSP. When I brought it up, it was reporting all channels were in service and idle. I thought that was rather strange and I knew it was wrong since I verified this with the telco. I set it to the correct value, rebooted the card, and it is still reporting all channels in service and idle. I'm still waiting on hold to get the switch techs to try putting some channels into IMB and see if I see them go out of service on this end (which, to me, would indicate that the second card is getting the signalling information ok) but surely there's an easier way to see if signalling is getting to the second card or not... Matthew... - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Internic
by Jim Johnson 17 Aug '99

17 Aug '99

This being my most technically capable mailing list :), I thought I would ask this off-topic qustion. Has anyone else observed problems with Internic the last few days. Root servers are timing out, domains are being dropped off the servers. We had 20 domains yesterday that were just gone from the root servers that we complained to Internic about. Today, the list is down to five. Our support people have heard from people of many domains that have been unreachable the last couple days. Seems like these widespread problems would have been headline news. Jim - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Acct-Terminate-Cause
by mingkai＠pacific.net.sg 17 Aug '99

17 Aug '99

Hi, I would like to find out under what circumstances do the Hiperarc (with HiperDSP cards) send out accounting stop packets with the attribute Acct-Terminate-Cause set to Lost-Carrier. Is this terminaate-cause send only when the HiperDSP modems detect a loss of DCD (carrier) before a LCP termination packet is received ? Or are there other circumstances under which the HiperAARCs will send a RADIUS stop packet with this terminate cause? Any advise will be greatly appreciated. Thanks. Ming Kai Network Engineer Pacific Internet Ltd - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) 2 ARC's - one chassis
by Boggs, Scott 17 Aug '99

17 Aug '99

I did it last May. I got these tips from chip(a)wirefire.com The only thing is that these are static assignments. Not real-time balancing. My PRI channels go round-robin so that evens the load on arc's enough to suit me. ------------------------------------------------ use this as a reference The first step is to turn off chassis awareness and re-boot: disable nmc chassis_awareness save all reboot The next step is to tell the HARC what slots it owns and what the cards are: set chassis slot 2-16 owner yes set chassis slot 2-16 card_type hdm_24 set chassis slot 2-16 ports 23 save all > -----Original Message----- > From: Jamie Orzechowski [SMTP:mhz@ripnet.com] > Sent: Monday, August 16, 1999 5:07 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) 2 ARC's - one chassis > > Could someone please give me a config to setup load balancing between 2 > arc's > > I will have 14 DSP's in one chassis with 2 ARC's controlling them. > > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) 2 ARC's - one chassis
by Jamie Orzechowski 17 Aug '99

17 Aug '99

Could someone please give me a config to setup load balancing between 2 arc's I will have 14 DSP's in one chassis with 2 ARC's controlling them. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Telnet exploit round 2...
by Stephen Amadei 17 Aug '99

17 Aug '99

O.K. I did the 'enable telnet cli' stuff with a nice brief 'add telnet cli xxx.xxx.xxx.xxx' list. I did a 'save all'. Everything worked correctly until I rebooted my TCs. Now they won't accept telnet access from anywhere. Anyone else notice this? I haven't been able to log into the local console yet to check the damage, but at least the equipment is working (well, except the telnet access). ----Steve Stephen Amadei Director of MIS Dandy Connections, Inc. Atlantic City, NJ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 4

(usr-tc) NMC event logging
by Jeff Mcadams 17 Aug '99

17 Aug '99

Started using RADIUS logging from the NMC's to get logging information from the modems...Some pretty useful stuff in here. Here's the deal though...trying to track down a likely telco issue (telco trunking between CO's) so trying to get logging on failed calls of ANI info. Quads I can do ok...other than having to get the modems idle to be able to set the trap-enables...which is annoying, but doable...the DSP's logging events on failed calls don't seem to have any way to snag ANI information. There's no equivalent to the dual-t1/pri card's callarriveevent either, so I can't grab it from there... Am I missing something here? -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0