December 1999 - USR-TC - mailman.xmission.com

(usr-tc) NetServer question...
by Steve Monkhouse 29 Dec '99

29 Dec '99

Hello all! Hope everyone had a good christmas and have a 'subdued' new years planned ! ( i know i dont ! ).. anyway.. One of the good old Netserver 486based cards here causing me 'simple' grief.. Card itself operates perfectly, Im writing a perl script at the moment that basically telnets to the card and does a sh sess.. problem arises when the netserver responds 'press return to continue'.. is there anyway of disabling this auto-pause function, or a command to set the termlength, or even better a program someone else has written to do a 'who's onine' query to the netserver ?? Any help appreciated.. Steve Monkhouse - Network Engineer --------------------------------------------------------------------- EtherTech Computer Services Ph : +61-3-9768-2665 Fx : +61-3-9768-2664 http://www.ethertech.com.au - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Disabling logging of root telnet session
by vanhalen＠coredcs.com 29 Dec '99

29 Dec '99

Hello- It's prolly been covered before but I can't find it in my archive. :( What's the command on a Hiperarc to disable logging to the radius server when I login with the root account? i.e. when I telnet into the arc an entry goes to the radius server.... how do I stop it? tia, Steve - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) NMC question
by Kalev Nurklik 29 Dec '99

29 Dec '99

How can I tell if I have a 386 or 486 4MB NMC in one of our chassis? It's on a remote POP so at the moment I only have SNMP access to it. __________________________________ Kalev Nurklik AS MicroLink Online Pa"rnu mnt. 158, 11317 Tallinn, Estonia Tel: +372 6501709 Fax: +372 6501708 E-mail: k.nurklik(a)online.ee http://microlink.online.ee - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

FW: (usr-tc) USR Total Control Gear
by Lee Eberhart 27 Dec '99

27 Dec '99

Here you go. Give me a call to make the arrangements. Lee -----Original Message----- From: CyberPort Montana [mailto:netboss@cyberport.net] Sent: Thursday, December 23, 1999 11:32 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) USR Total Control Gear How about a description? At 02:42 PM 12/23/1999 -0500, you wrote: >We have the following inventory that we are blowing out. If you want it, >let me know. > >qty 69-000790 Network Management Card >qty 69-000987 NMC >qty 69-001566 NMC w/ 486 processor >qty 69-000206 Dual T1 NIC >qty 69-001222 Dual T1 NIC >qty 69-000787 Quad Analog NAC >qty 69-000809 NMC >qty 69-000972 Netserver/PRI >qty 69-000205 Dual T1/E1 NAC >qty 69-000210 NMC > >$35 ea >Qty discounts as follows > >10+ $30 ea >25+ $25 ea > > >Happy Holidays, > >Lee Eberhart >MSI Communications >973-347-3349 x 217 >FAX 973-347-7176 > >mailto:lee@msic.com >http://www.msic.com > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Rockwell HCF Hell
by Brice Ligget 25 Dec '99

25 Dec '99

At 03:24 PM 12/23/1999 -0500, you wrote: >Hi guys. > >I don't know what kind of modem demographics your users are dragging in, >but here we are drowning in Rockwell HCFs that won't connect to anything >with a USR/3Com logo. > >We have both Quads and DSP cards, and we are running the _latest_ code. >TCS 3.6 with all the fixes. Most of the modem settings are the 3Com >defaults. > >What are the best way to get these to get these things to work? >Get an Ascend? The latest code made this all better for us as well. I must say that I've had an easier time with the Rockwells than I have with the 3Com winmodems. Now those are pieces of junk! As a last ditch I sometimes just disable the v.90 code and wait for a new software release... -- Brice Ligget Chief Operations Officer Two Alpha Net is a complete Internet Service Provider based in Billings Montana. "Connect to the world" 406 628 1500 http://www.twoalpha.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) Rockwell HCF Hell
by Stephen Amadei 24 Dec '99

24 Dec '99

Hi guys. I don't know what kind of modem demographics your users are dragging in, but here we are drowning in Rockwell HCFs that won't connect to anything with a USR/3Com logo. We have both Quads and DSP cards, and we are running the _latest_ code. TCS 3.6 with all the fixes. Most of the modem settings are the 3Com defaults. What are the best way to get these to get these things to work? Get an Ascend? ----Steve Stephen Amadei Director of MIS Dandy Connections, Inc. Atlantic City, NJ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 7

(usr-tc) USR Total Control Gear
by Lee Eberhart 23 Dec '99

23 Dec '99

We have the following inventory that we are blowing out. If you want it, let me know. qty 69-000790 qty 69-000987 qty 69-001566 qty 69-000206 qty 69-001222 qty 69-000787 qty 69-000809 qty 69-000972 qty 69-000205 qty 69-000210 $35 ea Qty discounts as follows 10+ $30 ea 25+ $25 ea Happy Holidays, Lee Eberhart MSI Communications 973-347-3349 x 217 FAX 973-347-7176 mailto:lee@msic.com http://www.msic.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) Rockwell HCF Hell
by Greg owens 23 Dec '99

23 Dec '99

Here in Southern Arkansas, Wal Mart recently had a truck load sale on Hewlett Packard computers. They all have the HCF modems oddly enough with the exception of 1 or 2 they are all working nicely here. Today I set up a new Compaq with a Lucent Win moden that was getting between 49 to 52,000 connection rates. We have not seen major problems with these modems recently.We are running all DSP's in our chassis's.... FWIW we have been reccommending and buying a few of the Creative Labs Modem Blaster that Wal Mart is selling here for around $49.00. The people that are using these are getting good connection rates and say they rarely ever loose connction so we didnt loose a customer. Buying and installing a modem when for a customer when you know they are having problems and about to leave you is a very cheap investment to keep them around for a while. Plus when they tell their friends what you have done for them that my friends is PRICELESS :-) Greg Owens Magnolia Internet Services http://www.magnolia-net.com ----- Original Message ----- From: Brian Elfert <brian(a)citilink.com> To: <usr-tc(a)lists.xmission.com> Sent: Thursday, December 23, 1999 2:53 PM Subject: Re: (usr-tc) Rockwell HCF Hell > > > On Thu, 23 Dec 1999, Stephen Amadei wrote: > > > We have both Quads and DSP cards, and we are running the _latest_ code. > > TCS 3.6 with all the fixes. Most of the modem settings are the 3Com > > defaults. > > We are still running the March '98 code on our Quad modems. > > Maybe we're lucky, or aren't trying hard enough, but we don't seem to have > problems with HCF modems. > > I never upgraded to the April 99 code because things are going well, and I > heard of a few folks having problems with the April 99 code. > > Brian > >

1 0

(usr-tc) NOTICE: HiPer DSP Service Release 2.0.51 for hardware version 0 .55.0 (posting complete)
by Chuck Stace 23 Dec '99

23 Dec '99

3Com Customers, 3Com would like to announce the release of HiPerDSP Service Release v2.0.51 on the TotalService website at: http://totalservice.3com.com/cgi-bin/w3com/start?totalservice+latest ( posted under Total Control Hubs ) or http://totalservice.3com.com/cgi-bin/w3com/start?totalservice+software ( search by Total Control Hubs : HiPer DSP) This Service Release provides fixes for the issues found with HiPer DSP hardware version 0.55.0. For more details on what issues are addressed with this Service Release, please reference the note below from 3Com Product Management and also the release notes found on TotalService. This code does not require a service contract to download, and will be free for download until the end of January 2000. (Jan. 31, 2000). If there are any questions or concerns regarding this Service Release, please contact 3Com Technical Support toll-free at 1-800-231-8770. If you are calling from an area not handled by this number, the TotalService website has contact information for other countries and regions. Please go to the TotalService website and click on 'Contacting Tech Support' for more information. Thank you and Happy Holidays, Chuck Stace CSO Customer Service Product Planning Chuck_Stace(a)3com.com ------- Dear 3Com Customer, 3Com would like to provide you with a status update regarding the recent HiPer DSP issues. Previous communication had identified three failures that had been reported against the HiPer DSP. We noted that we had done some investigation and felt that the three failures were a result of a single root cause. We had also outlined a plan that included two means of addressing this problem; 1.) We were in the testing phase of a software fix and 2.) We were working to identify hardware rework where necessary. At this time, we are pleased to announce that the testing of the software fix has been proven to address the issues. In addition it was confirmed that as expected the three failures were a result of a single root cause. We have completed ITG regression testing and STG network model testing with the new code and have not encountered any issues. Therefore, we are recommending the software fix to all of our customers that may have been affected by this issue. The software fix had been made available to a controlled customer base for testing and all of the feedback has been positive. Moving forward, the CSO team will support customers in their efforts to acquire this code. The CSO team has posted this release on the Total Service Web site as a Service Release. This code fix will provide our customers with the most expedient means of addressing this problem. The software will prevent the need of the customer to visually inspect all suspect boards and will prevent the time required for the hardware rework process. We thank you for your patience as we provide resolution to this issue. Best Regards, Amit Tiwari / Mike Shomaker 3Com Carrier Product Management - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Rockwell HCF Hell
by Luke Gasteiger 23 Dec '99

23 Dec '99

> >Hi guys. > >I don't know what kind of modem demographics your users are dragging in, >but here we are drowning in Rockwell HCFs that won't connect to anything >with a USR/3Com logo. > >We have both Quads and DSP cards, and we are running the _latest_ code. >TCS 3.6 with all the fixes. Most of the modem settings are the 3Com >defaults. In one chassis I have 5 CHT1 on DSPs with 2.0.60 and 1 CHT1 on Quads with 6.1.6 , ARC code 4.1.59. I have a separate access number for the Quads and have found that they answer most HSP56 modems as well as one might expect (the connect speeds vary and I get a few more disconnects but the customers seem quite happy with it). It seems that the DSPs won't connect with any HSP 33.6 or 56K, my biggest problem is that with the volume of HSP users I'll run out of capacity on the Quads long before the DSPs fill up. luke >What are the best way to get these to get these things to work? >Get an Ascend? > > ----Steve >Stephen Amadei >Director of MIS >Dandy Connections, Inc. >Atlantic City, NJ > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1