I am planning on replacing the working jib for my M-17 this next year. None of the info. I have for my boat gives the dimensions. Does anyone out there in M-land have the dimensions handy? Also, I was told by the previous owner that a Cal. 20 jib works well on an M-17, does anyone have any experience to confirm this? Regards...Arnold Sharpe, M-17 hull #265, "LITTLE BREEZE"
Hello, You could check with Bob Egg or Elliot/Pattison sails. E/P sails was one of the original OEM sail providers of Montgomery sails in Southern California. When I purchased a new 110% jib I put my order in to E/P, they provided a great product. They have all thedimensions needed in there data base. Here's a link: http://www.epsails.com/ Fair Winds Mark Escovedo M17F/D #103 AMY ----- Original Message ---- From: Arnold Sharpe <afsharpe@mac.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Sent: Thursday, November 20, 2008 9:48:09 PM Subject: M_Boats: M-17 Jib dimensions I am planning on replacing the working jib for my M-17 this next year. None of the info. I have for my boat gives the dimensions. Does anyone out there in M-land have the dimensions handy? Also, I was told by the previous owner that a Cal. 20 jib works well on an M-17, does anyone have any experience to confirm this? Regards...Arnold Sharpe, M-17 hull #265, "LITTLE BREEZE" _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Arnold, Sailrite has sail dimansions for the M17 on their website at www.Sailrite.com. Select sail quote in the menu and enter Montgomery 17 in the search block. You will then get a set of charts for the Main, Genoa, jib and Spinnaker. You can also get an online quote for the sails listed in the charts. I repair my own sails and make boat canvas and using their materials and a sailrite LSZ 1 sewing macnine. Really nice folks to do business with. Ron M17 #14 (fin keel) Griselda
To: montgomery_boats@mailman.xmission.com> From: afsharpe@mac.com> Date: Thu, 20 Nov 2008 21:48:09 -0800> Subject: M_Boats: M-17 Jib dimensions> > I am planning on replacing the working jib for my M-17 this next > year. None of the info. I have for my boat gives the dimensions. > Does anyone out there in M-land have the dimensions handy? Also, I > was told by the previous owner that a Cal. 20 jib works well on an > M-17, does anyone have any experience to confirm this?> Regards...Arnold Sharpe, M-17 hull #265, "LITTLE BREEZE"> > _______________________________________________> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Get more done, have more fun, and stay more connected with Windows Mobile®. http://clk.atdmt.com/MRT/go/119642556/direct/01/
participants (3)
-
Arnold Sharpe -
Mark Escovedo -
Ronnie Keeler