Hey, beautiful job, Tim! Very nice!

Thanks Larry. Appreciated.

So, I see from your picture site that you're already sailing up there in Canada. You're ahead of us "north Idaho sailors", but hopefully we'll be splashing our boats before long. It's been a long winter.

It seemed a long drawn out late winter here. We had a couple of extra nice days in mid March and got out then....but nothing since until this past weekend. Saturday was fabulous, sunny and hot....with only minor wind. Sunday was cloudy and not as warm (still short sleeves and shorts for a good part of the day) but much better wind. I spent about two hours between 4 and 5 1/2 knots during the last part of the day. It is always a thrill to find out that it all really does eventually return! Hang in there.

Cheers, Tim. Larry On Sun, 13 Apr 2008 10:50:18 -0700 "Tim Diebert" <tim@timtone.com> writes:

I built a new rudder in March and sailed with it for the first time yesterday. Images and comments are posted to a page I put together. Another chap on the list required some images for a rudder project he is doing so I thought I would post them in case any one else was interested.

Cheers, Tim Diebert Kelowna BC M17 #369-"PUFF"

http://www.timtone.com/monty/rudder.htm

_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats -- No virus found in this incoming message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.22.13/1377 - Release Date: 4/14/2008 9:26 AM