Thanks Blair. Actually I just finished making my own today and seems it actually might work quite well. I have a 4 stroke Honda 2hp so not a lot of weight. Was fun to make but it won’t win any marine design awards. Just used a two foot long 2x10 and using 2 U bolts attached it to the trailer upright. Stained it and then coated it with spar varnish. Looks great from a few feet away and carries the Honda just fine. Nice one day project.

On Jul 26, 2018, at 12:55 PM, Blair Ashworth <blairashworth@gmail.com> wrote:

Hi Doug, Here is an outboard mount for my trailer that I made for about $30. Here is the link to my facebook post describing the steps along with pictures.

https://www.facebook.com/groups/1005054962848194/permalink/1356369671050053/...

Hope this helps. Blair Montgomery 15

...

----------------------------------------------------------------------

Date: Wed, 25 Jul 2018 12:12:33 -0700 From: doug <doug9326@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: M_Boats: motor mount on trailer Message-ID: <1432B810-680C-49B6-84DE-8ECA1CD8FFAF@gmail.com> Content-Type: text/plain; charset=us-ascii

Does anyone have some good photos of your outboard mount on your trailer. I want to carry my motor there so it can remain upright and easily accessed. Thanks.

------------------------------