IF YOU REPLACE THE PIN, I'D SUGGEST YOU PUT IN SS SLEEVE FOR THE PIN -----Original Message----- From: "Doug Kelch" <doug_kelch@yahoo.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmissioncom> Sent: 12/12/07 8:41 AM Subject: Re: M_Boats: Keel pivot pin M15 #310 - previous owner had removed the pin from the port side. The pin in my boat is not tapered but is not original equiptment. When inserting the pin there was no indication that the hole was tapered. Thanks Doug Kelch Bill Lamica <billamicasr@gmail.com> wrote: I remember someone mentioning the keel pivot pin, or stop pin on some of the M-Boats has to be removed in one direction because the pin and hole are tapered. If someone knows the model and the direction of push, I sure could use the info. Bill _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats --------------------------------- Never miss a thing. Make Yahoo your homepage. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Thanks all, I'm doing another keel removal album for the site and wanted to make it factual. I believe I'll make mention of what may be found too: Someone found a nut and bolt instead of the original pin, must have done repairs with parts on hand. Doug, are you saying sleeve the keel itself? Thanks Jerry - tradition it is. Bill On Dec 12, 2007 9:23 AM, Jay Townley <jaytownley@alamedanet.net> wrote:
IF YOU REPLACE THE PIN, I'D SUGGEST YOU PUT IN SS SLEEVE FOR THE PIN
-----Original Message----- From: "Doug Kelch" <doug_kelch@yahoo.com> To: "For and about Montgomery Sailboats" < montgomery_boats@mailman.xmissioncom> Sent: 12/12/07 8:41 AM Subject: Re: M_Boats: Keel pivot pin
M15 #310 - previous owner had removed the pin from the port side. The pin in my boat is not tapered but is not original equiptment. When inserting the pin there was no indication that the hole was tapered.
Thanks
Doug Kelch
Bill Lamica <billamicasr@gmail.com> wrote: I remember someone mentioning the keel pivot pin, or stop pin on some of the
M-Boats has to be removed in one direction because the pin and hole are tapered. If someone knows the model and the direction of push, I sure could use the info. Bill _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
--------------------------------- Never miss a thing. Make Yahoo your homepage. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
I found a nut and bolt on mine, 1977 Monty 17. There was a but and bolt for the stop pin as well, that was pretty bent and wouldn't come out very easy. Sawzall use was required to remove that one --- --Chad On Dec 12, 2007, at 12:25 PM, Bill Lamica wrote:
Thanks all, I'm doing another keel removal album for the site and wanted to make it factual.
I believe I'll make mention of what may be found too:
Someone found a nut and bolt instead of the original pin,
must have done repairs with parts on hand.
Doug, are you saying sleeve the keel itself?
Thanks Jerry - tradition it is.
Bill
On Dec 12, 2007 9:23 AM, Jay Townley <jaytownley@alamedanet.net> wrote:
IF YOU REPLACE THE PIN, I'D SUGGEST YOU PUT IN SS SLEEVE FOR THE PIN
-----Original Message----- From: "Doug Kelch" <doug_kelch@yahoo.com> To: "For and about Montgomery Sailboats" < montgomery_boats@mailman.xmissioncom> Sent: 12/12/07 8:41 AM Subject: Re: M_Boats: Keel pivot pin
M15 #310 - previous owner had removed the pin from the port side. The pin in my boat is not tapered but is not original equiptment. When inserting the pin there was no indication that the hole was tapered.
Thanks
Doug Kelch
Bill Lamica <billamicasr@gmail.com> wrote: I remember someone mentioning the keel pivot pin, or stop pin on some of the
M-Boats has to be removed in one direction because the pin and hole are tapered. If someone knows the model and the direction of push, I sure could use the info. Bill _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
--------------------------------- Never miss a thing. Make Yahoo your homepage. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
OOPS! I meant Jay... Did you mean sleeve the keel itself? Thanks Chad, I think someone else had nut and bolt too. Bill On Dec 12, 2007 10:29 AM, Chad Parrish <cparrish@fafnirnet.net> wrote:
I found a nut and bolt on mine, 1977 Monty 17. There was a but and bolt for the stop pin as well, that was pretty bent and wouldn't come out very easy. Sawzall use was required to remove that one ---
--Chad
On Dec 12, 2007, at 12:25 PM, Bill Lamica wrote:
Thanks all, I'm doing another keel removal album for the site and wanted to make it factual.
I believe I'll make mention of what may be found too:
Someone found a nut and bolt instead of the original pin,
must have done repairs with parts on hand.
Doug, are you saying sleeve the keel itself?
Thanks Jerry - tradition it is.
Bill
On Dec 12, 2007 9:23 AM, Jay Townley <jaytownley@alamedanet.net> wrote:
IF YOU REPLACE THE PIN, I'D SUGGEST YOU PUT IN SS SLEEVE FOR THE PIN
-----Original Message----- From: "Doug Kelch" <doug_kelch@yahoo.com> To: "For and about Montgomery Sailboats" < montgomery_boats@mailman.xmissioncom> Sent: 12/12/07 8:41 AM Subject: Re: M_Boats: Keel pivot pin
M15 #310 - previous owner had removed the pin from the port side. The pin in my boat is not tapered but is not original equiptment. When inserting the pin there was no indication that the hole was tapered.
Thanks
Doug Kelch
Bill Lamica <billamicasr@gmail.com> wrote: I remember someone mentioning the keel pivot pin, or stop pin on some of the
M-Boats has to be removed in one direction because the pin and hole are tapered. If someone knows the model and the direction of push, I sure could use the info. Bill _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
--------------------------------- Never miss a thing. Make Yahoo your homepage. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
participants (3)
-
Bill Lamica -
Chad Parrish -
Jay Townley