I would get at least an 8 place panel and place it where it will be easy to work on. I put mine in the usual place, in the bulkhead right aft of the v-berth and it is hard to work on it there. It would be worth building a cabinet for it and placing it on the aft wall of the cabin next to the companionway. From there you can add two or three 12v plug fittings for search light, etc. I also led my shore power extension cord into the cabin via the opening left when the hatch is closed down to a male travel trailer type plug in the starboard quarter berth bulkhead far enough back under the cockpit so I won't be stepping on the plug while at the dock. From there I wired my 6v battery charter plug into the GFCI recepticle fed from the male trailer plug wire which runs inside the starboard quarter berth. good luck, Tom B This email has been sent from a virus-free computer protected by Avast. www.avast.com <https://www.avast.com/sig-email> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Tue, Feb 9, 2016 at 10:39 PM, Jazzy <jazzydaze@gmail.com> wrote:
Let's see some pics and comments on your switch panels.
Jazz