Hi Gary- long time no see. I think I can get that info for you re the 17 mast- Bob E uses the same extrusion and has some short lengths out in the back. When I get back there (next week) I'll weigh one and get back to you if I can get Bob to bring his scales in. I don't have internet access there but can have Bob sent you the info. Jerry ----- Original Message ----- From: GILASAILR@aol.com To: montgomery_boats@mailman.xmission.com Sent: Wednesday, May 01, 2002 11:32 PM Subject: Re: M_Boats: Mast-Section Question Does anyONE have information on the M-17 mast extrusion i.e. weight per foot? (This may be one of those questions) Thanks in advance to those of you who saw a piece off and weigh it...you can saw off 6" and double the wt. I'll accept that! Gary O. Life is Good! M-17 #316A M-7-11 # ? and The Mysterions (must be # 96!) C-21 Arizona Foothills 602 943-7252 Office 602 703-7245 Mobile 800 528-8962 Toll Free www.GaryOberbeck.com "Quality is never an accident; it is always the result of high intention, sincere effort, intelligent direction and skillful execution; it represents the wise choice of many alternatives." -William A. Foster