12 Jan
2011
12 Jan
'11
10:12 a.m.
Eldor M17 Motu iti, The problem is that the steel punchings, which are about 1/16" in diameter, are rusted/glassed into a singular mass. Once I break them up with my air chisel, they are easy to remove with a shop vacuum. I have gone as deep as the shaft of the chisel allows, the body of the air tool is too wide to get into the cavity of the trunk. As I was writing that, it occurs to me that I'll have the same problem if I cut holes in the sides of the trunk. Earl