Dented in one place? I'd say a "good" welder could just tig weld in a new section.(trick is knowing if they are good or not...I might get a demonstration first, weld thin aluminum to thickmaybe...) ....and since you are thinking of throwing it away anyway, seems that it might be worth a try. I'm sure shipping a small section is a lot cheaper than the whole mast. Even if you decide to get a new extrusion, might as well include shipping an extra section to fix the oldmast. Somebody might appreciate it someday. How did it happen? It might save someone another accident someday. On Wednesday, November 16, 2022, 12:55:09 PM PST, Gary H.Oberbeck <fairandsquare1@gmail.com> wrote: Gerry, sorry to hear of your plight. Contact Buzz Ballenger at Ballengerspars.com located in Watsonville,CA. They built my M-17 tall rig mast- a beautiful bit of work. Good luck, GO M-15 #330 ‘Cahoots’ On Wed, Nov 16, 2022 at 12:38 PM Gerald Wyatt <wyattgs@gmail.com> wrote:
Hello wrinkle boat owners,
Well, it is with disappointment that I need to email the group. I had an accident with my mast while getting the boat ready for the road. It was my fault (really dumb mistake), but the mast fell and now has a big dent. It will need replaced. It’s tough to stomach when you do something dumb and have it cause a problem like this. I feel like I let down the entire wrinkle boat community since there isn’t many of the 23’s around.
I need to find a rigging shop that can build a new one. I have insurance on the boat, but it will only cover $14,500. I’ve contacted 3 different rigging shops here in the Northwest. The first one wants 20K. I haven’t heard back from the other two.
Does anyone know of a good vendor or the best way to approach this? I need the price to be below $14,500.
Thanks,
Gerry M23 Dhana
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Gary H.Oberbeck <fairandsquare1@gmail.com> Sent: Monday, November 14, 2022 3:16:23 PM To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com>; wcampion@aol.com <wcampion@aol.com
Subject: M_Boats: Re: Erasing Age Lines
Great! You have quite the fleet there! Have fun,( the dirty washes off) Go sailing! G0
On Mon, Nov 14, 2022 at 3:34 PM Skip Campion via montgomery_boats < montgomery_boats@mailman.xmission.com> wrote:
Well, it was a long time in coming but it was definitely worth the wait. Ten years ago I stumbled across a rare M-5’8”. It was severely abused and needed lots of love. I had visions of restoring this little gem and came to the conclusion this project was going to be challenging. If I were to be successful with this restoration, I would need to use my ultimate multi-purpose tool. It can fix anything with ease. So I broke out my checkbook and took the little pram to a professional. This past weekend I picked up my renewed boat! The only problem I discovered..….the Chesapeake Bay and it's tributaries are so dirty, I’m not sure I want to place my new boat in such murky water! It would be an absolute shame to get this little gem dirty. 🤣
I’ve attached a few before and after pictures. My goal was to restored the pram to match my M-15. I plan to tow the pram behind me when I’m out for long weekends. I’m sure there’ll be a learning curve figuring out how best to tow the pram and transitioning between the two. But this will have to wait until spring. Skip Campion M-15 “Wild Guppy” 1982 #201 M-5’8” “Lil’ Guppy” 1972 #028