Thanks, Doug. That was very cool. Here's the original link for others: http://www.capizzano.com/Semana_de_Mar_del_Plata_2008/index.htm kb --- montgomery_boats-request@mailman.xmission.com wrote:
Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com
You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..."
Today's Topics:
1. Re: Wet Lockers question - Looking for Connie Bennick (Conbert H Benneck) 2. Cockpit table? (Bobbie Mayer) 3. Re: Good Dinghy for an M15 or M17 (Conbert H Benneck) 4. Re: Navigation GPS (Wcpritchett@aol.com) 5. Re: Navigation GPS (Wcpritchett@aol.com) 6. Havasu Poker Run/Scavenger Hunt Pictures (Nebwest2@aol.com) 7. Fwd: [openboat] speechless (Doug Kelch) 8. Re: Good Dinghy for an M15 or M17 (Gerald Wolczanski)
----------------------------------------------------------------------
Message: 1 Date: Mon, 3 Mar 2008 14:34:18 -0800 (PST) From: Conbert H Benneck <chbenneck@sbcglobal.net> Subject: Re: M_Boats: Wet Lockers question - Looking for Connie Bennick To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Message-ID: <387246.21615.qm@web83404.mail.sp1.yahoo.com> Content-Type: text/plain; charset=us-ascii
Sorry I don't have any photos of my cutting the shallow locker out (STBD side) to gain access to the space below on my M15.
After doing the cutting, around the flat lip, I epoxied supports to the underside of the cutout area in the hull so that I could drop in the shallow locker. That way I had the best of both worlds: the shallow locker area for small stuff, but when I lifted it out, I could stow large items (Bimini, extra cockpit cushions; my emergency paddle; etc. ( my PORT sail locker went to the bottom of the hull.
I also put a closed cell adhesive foam tape on the inside of the sail locker lids to make them waterproof.
I had latches on the sail lockers so that they could be locked with a pad lock when away from the boat (ABUS will sell you three small all brass locks all keyed the same. One key opens all three locks).
I fitted them so that the latches stayed firmly in place while sailing, but could be pulled off the hasp for access to the sail locker.
This way I had sealed sail locker lids, that were lockable.
Worked great.
Connie ex M15 #400 LEPPO
----- Original Message ---- From: "kdocter@bellsouth.net" <kdocter@bellsouth.net> To: montgomery_boats@mailman.xmission.com Sent: Monday, March 3, 2008 3:10:16 PM Subject: M_Boats: Wet Lockers question - Looking for Connie Bennick
I'm looking for pictures of the whole process of cutting out a locker for the purpose of expanded storage. If anyone has pictures of a completed project to include a good way to stop water intrusion below deck, I'd like to see them. I understand cutting the locker off. I'm looking for the rest of the story...
kdocter@bellsouth.net
Kendall M-15 #164 _______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
------------------------------
Message: 2 Date: Mon, 3 Mar 2008 18:36:02 -0800 From: Bobbie Mayer <barbaram@csufresno.edu> Subject: M_Boats: Cockpit table? To: montgomery_boats@mailman.xmission.com Message-ID: <a0624080fc3f265dd1a1a@[172.16.1.34]> Content-Type: text/plain; charset="us-ascii" ; format="flowed"
I'm looking for a swing-away type cockpit table or something similar, not very expensive, not really for my M15 but I figured someone here might have an idea where to get or how to build one.
Bobbie
------------------------------
Message: 3 Date: Tue, 4 Mar 2008 14:05:40 -0800 (PST) From: Conbert H Benneck <chbenneck@sbcglobal.net> Subject: Re: M_Boats: Good Dinghy for an M15 or M17 To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Message-ID: <792967.12327.qm@web83409.mail.sp1.yahoo.com> Content-Type: text/plain; charset=us-ascii
Hi M-ers,
In case any of you might need a good dinghy for your M15
=== message truncated === ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs