Th ank you1 jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 29, 2013 12:50 PM Subject: Re: M_Boats: Ida rudder
Jerry, The gudgeon arrived yesterday. Thank you. Tom Buzzi
On Thu, May 23, 2013 at 1:04 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
Shipping came to 5.80, so the total would be 15.80. My address is 3749 Rock Island Dr Sacramento 95827.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Monday, May 20, 2013 7:33 PM Subject: Re: M_Boats: Ida rudder
Hi jerry,
Sounds like a deal to me. How would you like the funds delivered? My address is 302 Palmetto Avenue Rockport, Texas 78382 Thanks, Tom Buzzi
On Mon, May 20, 2013 at 4:07 PM, jerry montgomery < jerry@jerrymontgomery.org
wrote:
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X
4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry,
Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>****wrote:
Could you have that backwards? We made most of the 17s with three-pintle
setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xm**ission.com<http://xmission.com> <montgomery_boats@**mailman.xmission.com<montgomery_boats@mailman.xmission.com> > >> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to > install > an Ida sailor rudder on it from a 2005 Montgomery 17. That setup > uses > three > pintles whereas my older stock rudder model uses only two. Can a > third > be > added so this setup will work on my boat or is there some other > consideration that needs tending to? > You mentioned you have a stock of old parts. Do you have a set of > the > old > grugeon/pintle (s) available? > Regards, > Tom B > > > > -- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http:****//www.spamfighter.com/SLOW-****<http://www.spamfighter.com/SLOW-**> PCfighter?cid=sigen<http://**www.spamfighter.com/SLOW-** PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen> > >