I have just acquired a 1983 Montgomery 15. Boat is in fine condition with one exception - the centerboard is not installed and there appears to be no way to do so !!! I tried to attach a picture but sig won't take so here is a short description of centerboard: 32" long 17.5" at widest point weighs 33 lbs exactly There is a hole in the board for the pennant line but no hole for the pivot !! It appears to be glassed over (quite professionally!) There is also no hole in the centerboard trunk to hold a pin and no hole for a stop pin either! (Guy just couldn't stop glassing!) So here's the problem - the holes must be re-drilled -- but where??? Seems like some precise measurements are needed for both centerboard and trunk holes. Also what size bolt/pin ?? What size line is used for the pennant? Looks like 1/4 to 5/16 from the pennant hole(s). Also I have heard about a stop pin. Necessary? function? Any help muchly appreciated Cheers Bud Holzschuh __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus Powerful. Affordable. Sign up now. http://mailplus.yahoo.com