sal: copy the dimensions, cut some wood (plywood will be functional), get some gudgons and build your own. take what remains of the crutch you have to a metal shop and have another made. or, call bob and order one. the honda 2 4-cycle long shaft is the perfect motor for the m15. the only limitation with the motor is there is no external tank option. dave scobie M17 #375 - SWEET PEA visit SWEET PEA's www-site - http://www.m17-375.webs.com
On Oct 3, 2009, at 5:16 PM, SALGLESSER@aol.com wrote:
Hi all,
We had a little snow storm last week (10") so I threw a tarp over our M15 to keep the snow off. Unfortunately the wind was stronger than expected. The wind grabbed the tarp and the mast and bent the support 90 degrees. I believe I can straighten it, but i don't think I can get the kink out. Is there a source or supplier to get a new one? Our boat is an '86, will a new one fit? Any help would be appreciated.
We have an inboard electric motor on our boat, but it was suggested that we also carry an outboard for longer windless runs that sometimes occur in these "gatherings" like the Havasu event. So I'm going to mount a rack (folding) for a motor. Is there an optimum depth for the prop? How much power will I need to push the M15 "properly"? Any suggestions are appreciated.
sal
M15 '86 #361 Justus