Tod, I would like to hear more about your keel roller additions. Thanks, Craig ----- Original Message ----- From: <htmills@bright.net> To: ">Mboats<" <montgomery_boats@mailman.xmission.com> Sent: Friday, May 17, 2002 4:23 PM Subject: trailer refurb and a question on winch location. Well, wish me luck....Am in the process of a trailerectomy. Last time I jacked the boat up off the trailer; this time I'm jacking up the whole kit and caboodle, then blocking the boat and lowering the trailer. We'll see which is easier. 'Twould be nice to have slings and a hoist but alas I have none (next time around I hope to!). Just picked up the sandblaster. Bought some steel from work to replace the tongue tube and add keel rollers (will have 4 instead of 1) and keel guides. Thanks everyone for sending in their pictures of their guides (and Doug for adding them to the web page), it helped me see how I'd like to do them. Hopefully by this time tomorrow the trailer will have that stuff and a coat of primer on it. *******Question in this paragraph******Right now, there is a 2.5" x 2.5" square tube sticking up from the tongue tube. On top of that is a 3" or 4" (can't recall just what it is) channel with both legs facing down. The winch is mounted on top of that and there is a V-block at the aft end of the channel for the bow of the boat. The V-block contacts the bow a couple of inches below the bow eye. Does anyone have a better arrangement? Thanks much, Tod