Assuming yhou have a vang for off-wind control, the only advantage in a rb traveller would b e in light air upwind, when you could pull the car to weather and ease off on the sheet, controlling the twist. Seems that there are a lot of opinions on the best sheeting system! jerry ----- Original Message ----- From: "George R. Iemmolo" <griemmolo2@gmail.com> To: "'For and about Montgomery Sailboats'" <montgomery_boats@mailman.xmission.com> Sent: Friday, December 28, 2012 11:27 AM Subject: Re: M_Boats: FW: Traveler System Conversion
Jerry
I get from your comment that the present stern rope traveler on the M15 works good enough that the incremental improvement of a roller bearing car/track system is not worth the expense. I will look at some Marine Consignment shops in my area (Southern Lake Michigan) to see what I can scrape up. I would consider a change if I could keep it to about $100
I am familiar with your preferred location of the mainsheet on the cockpit floor ahead of the tiller having sailed an Alerion 28 set up that way. Tiller extension a given for proper weight distribution in any situation.
George We can not control the Wind But we can adjust our Sails
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of jerry montgomery Sent: Friday, December 28, 2012 10:50 AM To: For and about Montgomery Sailboats Subject: Re: M_Boats: FW: Traveler System Conversion
Well, I have my own preferences on the mainsheet- assuming I'm the skipper and I like to sit just ahead of the end of the tiller, and I like to have the mainsheet convenient to that position, which to me is on the cockpit sole just ahead of my feet. The M-15 mainsheet works prettty well; but if I were making one for myself I'd put the mainsheet cleat right in front of my feet to avoid it getting tangled in the crew's feet. The stern rope traveller works well enough and is way cheaper than a roller bearing-type traveller.
I'm not quite as uptight as Dave is about getting weight forward; in a race in a drifter I'd have the crew stand in the companionway and move myself forward to about the center of the cockpit, assuming I had a tiller extension. Otherwise I'd not worry about it. jerry ----- Original Message ----- From: "George R. Iemmolo" <griemmolo2@gmail.com> To: <montgomery_boats@mailman.xmission.com> Sent: Friday, December 28, 2012 7:58 AM Subject: M_Boats: FW: Traveler System Conversion
-- I am using the free version of SPAMfighter. SPAMfighter has removed 7611 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len Do you have a slow PC? Try a Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen