October 2018 - mathfun@mailman.xmission.com

[math-fun] Rolling polyhedra
by James Propp 25 Dec '20

25 Dec '20

I want to think about rolling polyhedra, and the polyhedra I want to think about rolling are polyhedra in which the sum of the angles at each vertex is a submultiple of 360 degrees. For instance, given any triangle T, we can create a tetrahedron whose four faces are all congruent to T, with angle-sum 180 degrees at each vertex (there's a name for such tetrahedra but I forget what it is). Are there other polyhedra in which the angles at each vertex sum to a submultiple of 360 degrees (not necessarily the same one at each vertex)? Jim Propp

4 10

[math-fun] One parameter quintic solution
by Bill Gosper 31 Oct '20

31 Oct '20

This is probably ho-hum, but while trying to simplify a Chowla-surdberg, I found that 0 = a + 80 x + 20 x^3 + x^5 has solutions {((-a - Sqrt[4096 + a^2])^(1/5) E^((2 I \[Pi])/5))/2^( 1/5) + ((-a + Sqrt[4096 + a^2])^(1/5) E^((2 I \[Pi])/5))/2^( 1/5), ((-a + Sqrt[4096 + a^2])^(1/5) E^(-((2 I \[Pi])/5)))/2^( 1/5) + ((-a - Sqrt[4096 + a^2])^(1/5) E^(-((4 I \[Pi])/5)))/2^( 1/5), ((-a - Sqrt[4096 + a^2])^(1/5) E^(-((2 I \[Pi])/5)))/2^( 1/5) + ((-a + Sqrt[4096 + a^2])^(1/5) E^(-((4 I \[Pi])/5)))/2^( 1/5), (-a + Sqrt[4096 + a^2])^(1/5)/2^( 1/5) + ((-a - Sqrt[4096 + a^2])^(1/5) E^((4 I \[Pi])/5))/2^( 1/5), (-a - Sqrt[4096 + a^2])^(1/5)/2^( 1/5) + ((-a + Sqrt[4096 + a^2])^(1/5) E^((4 I \[Pi])/5))/2^(1/5)} Is it from a two-parameter family? C.f. https://en.wikipedia.org/wiki/Quintic_function#Other_solvable_quintics --rwg

1 3

[math-fun] How does a dull spoon manage to cut a stringy piece of meat
by Bill Gosper 14 Jul '20

14 Jul '20

while sliding back an forth against the inside of a slippery bowl? --rwg

5 9

[math-fun] Heighway triple points redux
by Bill Gosper 21 Mar '20

21 Mar '20

I thought OEIS A260482, A260747..A260750 completely described the (initial) Dragon triple points, all of which have preimages a(n)/15/2^k. But I just noticed an editor's remark that there is another infinite family of the form a(n)/7/2^k. These are much less "photogenic" than the old set (e.g. gosper.org/dragtrip!.png) <http://gosper.org/dragtrip!.png> because two preimages always(?) differ by 2/7/2^k, and ~75% of them have the 3rd preimage within 4/7/2^k. But they can get "arbitrarily" lopsided: In[508]:= undrag[(69 + 27 I)/160] Out[508]= {1539/3584, 2551/3584, 2553/3584} (Differences presumably limited to 40%.) Also, Julian has privately remarked that there are no irrational triple points. --rwg

1 2

[math-fun] Dean Hickerson
by James Propp 21 Oct '19

21 Oct '19

Anyone have a current email address for Dean Hickerson? "dean at math daht ucdavis daht edu" and "dean at ucdmath daht ucdavis daht edu" aren't working anymore. Thanks, Jim Propp

5 5

[math-fun] ellipsoid from girths: multivariate series reversion
by Bill Gosper 25 Jun '19

25 Jun '19

Corey notes that ellipsoid girths can't be {large, tiny, tiny} and challenges us to find the "ellipsoid girth inequality" analogous to the triangle inequality. What are the dimensions (semiaxes a,b, and c) of say, the ellipsoidoidal rock by the road near the Foothill College fire station, given the girths gab, gac, gbc; a>b>c? (Assuming you can get the damned thing off your tape measure once you've rolled it on.) In terms of a, b, c, the girths are {gab -> 4 a EllipticE[1 - b^2/a^2], gac -> 4 a EllipticE[1 - c^2/a^2], gbc -> 4 b EllipticE[1 - c^2/b^2]} This is a routine problem for FindRoot, but it would be nice to see how a, b, c depend on the girths in the low eccentricity case, say, by reverting the series expansions of the girths. Julian, Corey, and I were surprised by the absence of multivariate reversion from Macsyma and Mathematica, and set about building our own. After several hours of cruel hoodwinking by Mma's Series facility, we emerged having only solved the ellipsoid case. Surprisingly(?), it has at least eight (2^3) solutions, which may help to explain the shortage of multivariate reverters. To fourth order, {a -> (gab/(2 Pi))(1 - eac + eac^2 + ebc + (eac ebc)/2 - (3 ebc^2)/2 + 1/8 (-8 eac^3 - eac^2 ebc - 9 eac ebc^2 + 18 ebc^3) + 1/16 (16 eac^4 + 2 eac^3 ebc - 3 eac^2 ebc^2 + 42 eac ebc^3 - 57 ebc^4)), a -> (gac/(2 Pi))(1 + ebc + 3/2 (eac ebc - ebc^2) + 3/8 (eac^2 ebc - 7 eac ebc^2 + 6 ebc^3) - 3/16 (7 eac^2 ebc^2 - 26 eac ebc^3 + 19 ebc^4))} {b -> (gab/(2 Pi))(1 + eac - (3 eac^2)/2 - ebc + (eac ebc)/2 + ebc^2 + 1/8 (18 eac^3 - 9 eac^2 ebc - eac ebc^2 - 8 ebc^3) + 1/16 (-57 eac^4 + 42 eac^3 ebc - 3 eac^2 ebc^2 + 2 eac ebc^3 + 16 ebc^4)), b -> (gac/(2 Pi))(1 + 2 eac - eac^2/2 - ebc - (eac ebc)/2 + ebc^2 + 1/8 (6 eac^3 - 5 eac^2 ebc + 7 eac ebc^2 - 8 ebc^3) + 1/16 (-21 eac^4 + 24 eac^3 ebc - 5 eac^2 ebc^2 - 14 eac ebc^3 + 16 ebc^4))} {c -> (gab/(2 Pi))(1 - eac + eac^2 + eac^4 - ebc - (eac ebc)/2 - (eac^3 ebc)/ 8 + ebc^2 - (5 eac^2 ebc^2)/16 - (eac ebc^3)/8 + ebc^4 + 1/8 (-8 eac^3 + eac^2 ebc + eac ebc^2 - 8 ebc^3)), c -> (gac/(2 Pi))(1 - ebc - (3 eac ebc)/2 - (3 eac^2 ebc)/8 + ebc^2 + (9 eac ebc^2)/8 - (3 eac^2 ebc^2)/16 - ebc^3 - ( 9 eac ebc^3)/8 + ebc^4)} where {eac -> gab/gac - 1, ebc -> gab/gbc - 1}, which are small for low eccentricity. E.g., for {a -> 5., b -> 4., c -> 3.}, the girth formulæ give {gab -> 28.3617, gac -> 25.527, gbc -> 22.1035}. Plugging these back into the reversions: {{a -> 4.97828, a -> 4.98561}, {b -> 4.00689, b -> 4.00371}, {c -> 3.0062, c -> 3.00353}}. --rwg

3 5

[math-fun] Neutron stars as atoms
by Warren D Smith 23 Apr '19

23 Apr '19

Whitfield Diffie I recall reading the intreaguing observation that stable neutron structures run up to around atomic wieght 300 and then their is a long gap before you get to the neutron stars with atomic weights around 10^50. Perhaps we should regard the neutron stars as isotopes of very heavy elements. The atomic numbers would be miniscule by comparison with the atomic weights but a mildely positively charged neutron star doesn't seem impossible: would adding a billion protons make a difference? --WDS: A better way to view this is: replace the word "stable" with "stable under pressure." See, I would claim that it is an illusion that there is no stable nucleus with atomic weight 1000. Actually, if you put it under enough pressure, then it would presumably become stable. The only problem is humans have no hope of sustaining pressures that large and the only known way to reach them is inside a neutron star. Anyhow, with suitable pressure ramp up, probably there is no "gap" at all, and practically the full range of atomic weights become reachable with stability. Another thing is: the usual nuclei generally are in the ground state. Excited states that last long, are rare for nuclei. But for a neutron star, it presumably never reaches ground, there are too many excited states it gets trapped in for long periods. -- Warren D. Smith http://RangeVoting.org <-- add your endorsement (by clicking "endorse" as 1st step)

7 9

[math-fun] square root approximation?
by Stuart Anderson 06 Nov '18

06 Nov '18

Is this a known method? Not particularly accurate though https://mystudentvoices.com/how-an-old-mans-ravings-awakened-the-mathematic…

4 3

[math-fun] Lower bound in superpermutation problem proven by anonymous anime fan
by Allan Wechsler 06 Nov '18

06 Nov '18

At http://mathsci.wikia.com/wiki/The_Haruhi_Problem, we have an intriguing situation. The problem is, what is the shortest string that contains every permutation on N letters as a substring. The problem has been around for a while, but somebody posted it on Wikia, a wiki dedicated to fans of various TV programs, mostly anime. Then an anonymous commenter posted a proof of a lower-bound that had been conjectured earlier, that the shortest string must have length at least n! + (n-1)! + (n-2)! + n - 3, for n > 2. The style is a little bit amateurish but the proof seems correct. Robin Houston, a mathematician who has worked on the problem, has vetted it. Nobody knows who the prover is.

4 3

[math-fun] p1100-MWSS-gun.lua
by Bill Gosper 01 Nov '18

01 Nov '18

I urge anyone who has not tried this to randomly delete one of the 1142 gliders and watch things shut completely down. Nice exercise: Use Golly to determine that 1142 glider count. (Ask for hints!) —Bill Perhaps in the info the .lua could encourage these experiments. It might also mention that this was only the 3rd(?) "glider" gun, following a 10(?) yr drought. (The technology supports periods 900+200n, but n=0 gives a dull multiple of 30.) And I would like to hear about the CAD technology, which seems dramatically more concise than my ZetaLisp CAD system.

1 1