February 2010 - mathfun@mailman.xmission.com

[math-fun] muffin problem -- clusters and bounds
by Huddleston, Scott 01 Dec '17

01 Dec '17

I enclose examples of some of the bounds in my 28 Feb. post, and a derivation of the most involved example. S(12/7) = 3/7 = r/4 = (3-r)/3 Muffins: 1/7 * { [3,4]*12 } Persons: 1/7 * { [4*3]*4, [3*4]*3 } S(7/4) = 5/12 = (3-r)/3 = (2r-1)/6 Muffins: 1/12 * { [5,7]*6, [6*2] } Persons: 1/12 * { [5*3,6]*2, [7*3]*2 } S(40/23) = 19/46 = (2r-1)/6 = (12-5r)/8 Muffins: 1/46 * { [19,27]*24, [20,26]*12, [23*2]*4 } Persons: 1/46 * { [19*3,23]*8, [20*4]*3, [27*2,26]*12 } S(228/131) = 54/131 = (12-5r)/8 = (7r-6)/15 Muffins: 1/131 * { [54,77]*120, [55,76]*24, [57,74]*60, [65,66]*24 } Persons: 1/131 * { [54*3,66]*24, [54*2,55,65]*24, [57*4]*15, [77*2,74]*60, [76*3]*8 } S(449/258) = 319/774 = (7r-6)/15 = (73-32r)/42 Muffins: 1/774 * { [319,455]*210, [320,454]*30, [325,449]*42, [336,438]*30, [337,437]*90, [384,398]*42, [387*2]*5 } Persons: 1/774 * { [319*3,390]*42, [319*2,325,384]*42, [320*3,387]*10, [336,337*3]*30, [455*2,437]*90, [455,454,438]*30, [449*3]*14 } Here's a derivation of 449/258 example. 449 muffins -> 898 pieces, used in 124 4-parts with 496 pieces and 134 3-parts with 402 pieces. We split muffins between a 3-part and a 4-part when possible, but 4-parts contain 94 more pieces than 3-parts. We divide these 94 pieces (47 muffins) as evenly as possible among the 124 4-parts. 47 pairs of 4-parts contain both halves of a muffin, which I'll call an A^1 cluster and write A^1 = [a1*3,m]*2 where m denotes the two muffin halves and the other pieces are denoted a1, indicating a set of pieces of possibly different sizes that occure in A^1 clusters. 34 4-parts contain only muffin pieces whose mates appear in 3-parts. These I call A^0 clusters and write A^0 = [a0*4] The 449/258 example uses 30 A^0 clusters ([a0*4])*30 (120 a0 pieces, 30 4-parts) 47 A^1 clusters ([a1*3,m]*2)*47 (282 a1 pieces, 94 4-parts) Note that the A^1 cluster by itself sets an upper bound on S -- the cluster is 2 persons (size 2r), it cntains 1 complete muffin (size 1, pieces m*2), and it has 6 unmatched muffin pieces (a1*6), giving S(449/258) <= avg(a1) = (2r-1)/6. A^0 clusters also bound S by S(449/258) <= avg(a0) = r/4, but the A^1 cluster bound is tighter. Note that this (2r-1)/6 bound holds for examples 7/4 and 40/23. The muffin mates of a0 pieces (resp. a1 pieces) are z0 pieces (resp. z1 pieces). We distribute z0 and z1 pieces as evenly as possible across the 134 3-parts (402 pieces). With 282 z1 pieces, at least 14 3-parts must consist of only z1 pieces. These are Z^0 clusters, Z^0 = [z1*3] = [z10*3] where I refine piece labels so that z1 pieces appearing in Z^0 clusters are labelled z10. I create general Z^k clusters by finding minimal sets of persons that contain complete a0/z0 muffins. Maximally even distribution of the 120 z0 pieces places one per 3-part. Then a Z^1 cluster, closed under a0/z0 muffins, is Z^1 = [a0*4],[z0,z1*2]*4 = A^0,[z0,z11*2]*4 where z1 pieces appearing in Z^1 clusters are relabelled z11. Z^0 clusters bound S by S(449/258) <= avg(a10) = 1-avg(z10) = 1-r/3 = (3-r)/3 and Z^1 clusters provide an even tighter bound S(449/258) <= avg(a11) = 1-avg(z11) = 1-(5r-4)/8 = (12-5r)/8. The 449/258 example uses 14 Z^0 clusters = ([z10*3])*14 ( 42 z10 pieces, 14 3-parts) 30 Z^1 clusters = (A^0,[z0,z11*2]*4)*30 (240 z11 pieces, 120 3-parts) As before, we refine the labelling of a1 pieces into a10 and a11 pieces, according to z10 or z11 complements. The next level of clustering is constructed by taking closure under a10/z10 muffins. The 282 a1 pieces in the 47 A^1 clusters are divided into 240 a11 pieces and 42 a10 pieces. Thus at least 5 A^1 clusters must contain only a11 pieces, and with maximally even distribution we have 42 A^1 clusters with 1 a10 piece and 5 a11 pieces. Continuing to refine pieces according to their appearance in A^10 or A^11 clusters, we have A^10 = A^1 = {a110*6, ...} (6 a110 pieces and some other pieces) A^11 = Z^0, (A^1)*3 = (a111*15, ...) with 449/258 consisting of 5 A^10 clusters ( 5 A^1 clusters, 30 a110 pieces) 14 A^11 clusters (42 A^1 clusters, 252 a111 pieces) A^11 clusters provide bound S(449/258) <= avg(a111) = (7r-6)/15 The 449/258 example lies on the intersection of this bound and the next level cluster bound. The next cluster level takes a110/z110 muffin closure and induces clusters Z^10 = Z^1 Z^11 = A^10, (Z^1)*6 with 449/258 consisting of 0 Z^10 clusters 5 Z^11 clusters (i.e., only Z^11 clusters) and bound S(449/258) <= avg(a1111) = 1-avg(z1111) = (73-32r)/42. I conclude with some computer generated additional information on these bounds. If anyone sort of understands this post and would like to use my program as is (i.e., no manual and documentation is mostly my posts), drop me a note and I'll send the C++ source (300 lines). B<4>(r) = (1r-0)/4; S'(r) <= B<4>(r) on (3/2,2/1] tight bound on (3/2,8/5] and at r = (4+8k)/(2+5k) (3/2,8/5] contains mediant(3/2,8/5) = 11/7 S'( (3/2,8/5] ) = (3/8,2/5]; S'(11/7) = 11/28 B<>(r) = (1-0r)/2 B<4>(r) = B<>(r) at r = 2/1 = 2.0000000 S'(2/1) = 1/2 = 0.50000000 B<4,1>(r) = (3-1r)/3; S'(r) <= B<4,1>(r) on [12/7,2/1) tight bound on [9/5,2/1) and at r = (12+9k)/(7+5k) [9/5,2/1) contains mediant(9/5,2/1) = 11/6 S'( [9/5,2/1) ) = [2/5,1/3); S'(11/6) = 7/18 B<4>(r) = (1r-0)/4 B<4,1>(r) = B<4>(r) at r = 12/7 = 1.7142857 S'(12/7) = 3/7 = 0.42857143 B<4,1,1>(r) = (2r-1)/6; S'(r) <= B<4,1,1>(r) on (12/7,7/4] tight bound on (12/7,59/34] and at r = (21+59k)/(12+34k) (12/7,59/34] contains mediant(12/7,7/4) = 19/11 S'( (12/7,59/34] ) = (17/42,7/17]; S'(19/11) = 9/22 B<4,1>(r) = (3-1r)/3 B<4,1,1>(r) = B<4,1>(r) at r = 7/4 = 1.7500000 S'(7/4) = 5/12 = 0.41666667 B<4,1,1,1>(r) = (12-5r)/8; S'(r) <= B<4,1,1,1>(r) on [40/23,7/4) tight bound on [148/85,7/4) and at r = (80+148k)/(46+85k) [148/85,7/4) contains mediant(47/27,7/4) = 54/31 S'( [148/85,7/4) ) = [7/17,13/32); S'(54/31) = 51/124 B<4,1,1>(r) = (2r-1)/6 B<4,1,1,1>(r) = B<4,1,1>(r) at r = 40/23 = 1.7391304 S'(40/23) = 19/46 = 0.41304348 B<4,1,1,1,1>(r) = (7r-6)/15; S'(r) <= B<4,1,1,1,1>(r) on (40/23,228/131] tight bound on (40/23,1119/643] and at r = (228+1119k)/(131+643k) (40/23,1119/643] contains mediant(40/23,47/27) = 87/50 S'( (40/23,1119/643] ) = (142/345,265/643]; S'(87/50) = 103/250 B<4,1,1,1>(r) = (12-5r)/8 B<4,1,1,1,1>(r) = B<4,1,1,1>(r) at r = 228/131 = 1.7404580 S'(228/131) = 54/131 = 0.41221374 B<4,1,1,1,1,1>(r) = (73-32r)/42; S'(r) <= B<4,1,1,1,1,1>(r) on [449/258,228/131) tight bound on [9349/5372,228/131) and at r = (1347+9349k)/(774+5372k) [9349/5372,228/131) contains mediant(134/77,47/27) = 181/104 S'( [9349/5372,228/131) ) = [1107/2686,2267/5502); S'(181/104) = 75/182 B<4,1,1,1,1>(r) = (7r-6)/15 B<4,1,1,1,1,1>(r) = B<4,1,1,1,1>(r) at r = 449/258 = 1.7403101 S'(449/258) = 319/774 = 0.41214470 B<4,1,1,1,1,1,1>(r) = (61r-60)/112; S'(r) <= B<4,1,1,1,1,1,1>(r) on (449/258,764/439] tight bound on (449/258,149516/85913] and at r = (10696+149516k)/(6146+85913k) (449/258,149516/85913] contains mediant(449/258,764/439) = 1213/697 S'( (449/258,149516/85913] ) = (11909/28896,35408/85913]; S'(1213/697) = 32173/78064 B<4,1,1,1,1,1>(r) = (73-32r)/42 B<4,1,1,1,1,1,1>(r) = B<4,1,1,1,1,1>(r) at r = 764/439 = 1.7403189 S'(764/439) = 2533/6146 = 0.41213798 B<4,1,1,1,1,1,1,1>(r) = (1101-487r)/615; S'(r) <= B<4,1,1,1,1,1,1,1>(r) on [160212/92059,764/439) tight bound on [1313469/754729,764/439) and at r = (160212+6567345k)/(92059+3773645k) [1313469/754729,764/439) contains mediant(19549/11233,764/439) = 20313/11672 S'( [1313469/754729,764/439) ) = [1555262/3773645,111271/269985); S'(20313/11672) = 986147/2392760 B<4,1,1,1,1,1,1>(r) = (61r-60)/112 B<4,1,1,1,1,1,1,1>(r) = B<4,1,1,1,1,1,1>(r) at r = 160212/92059 = 1.7403187 S'(160212/92059) = 37941/92059 = 0.41213787

2 1

Re: [math-fun] parametrizing the Koch snowflake curve
by Bill Gosper 24 Apr '15

24 Apr '15

Fourier epicycles thru nth: (d16) sum(((product((1 - (( - 1)^j * tan(((%pi * (2 * k + (1/3)))/(2^j)))/(sqrt(3)))),j,1,inf)) * (%e)^(%i * (6 * k + 1) * t)/((2 * k + (1/3))^2)),k, - n,n) See http://www.tweedledum.com/rwg/cog.htm Also http://gosper.org/fst.dvi Pix: http://gosper.org/fst1.png ,http://gosper.org/fst2.png , http://gosper.org/fst3.png ,http://gosper.org/fst4.png . (For parametric, take Re and Im.) Rich's base 4 recursion loops for rational arg. Find the fixed point of the pending stack ops to simulate infinite recursion, and get an exact val on the curve. Equate to this Fourier series for a *non-obvious* identity. --rwg > If you view the starting triangle as running from 0 to 3, > and write the fraction base 4, you can use the > fraction digits to select which part of the (sub)edge > you are on. The orientation of the edge can be calculated > from the 1s and 2s of the high order portion of the fraction, > and that should give a somewhat kludgy sum for the (x,y) > coordinates of the image point. > RWG likely has some nice FFT clock sum expression. > > Rich > > > -----Original Message----- > From: math-fun-bounces(a)mailman.xmission.com [mailto: math-fun-bounces(a)mailman.xmission.com] On > Behalf Of N. J. A. Sloane > Sent: Thursday, February 25, 2010 12:43 PM > To: math-fun(a)mailman.xmission.com > Cc: njas(a)research.att.com > Subject: Re: [math-fun] parametrizing the Koch snowflake curve > > Jim Propp asked: > >> Does anyone (Bill Gosper, maybe?) know an explicit parametrization > of the Koch snowflake curve? > > The Cantor set consists of the points 0 <= x <= 1 which have a base 3 "decimal" expansion that > does not contain a 1. Is there a similar characterization of the Koch snowflake? > > Neil Sloane > >

2 1

Re: [math-fun] Disk polyominoes
by Allan Wechsler 13 Apr '12

13 Apr '12

A funster who might or might not wish to remain anonymous has corrected me in private. A3 does not equal 2; it equals 1. The corrected sequence is: 1, 1, 1, 1, 2, 2, 2, 1, 2, 2, 3, 3 ... As before, I'm not entirely confident of the last couple of values. Thank you for the correction.

5 15

[math-fun] Machine Go
by rcs＠xmission.com 12 Oct '11

12 Oct '11

Science Daily has a report of a recent success for a Go program. http://www.sciencedaily.com/releases/2009/05/090514083931.htm The program Huygens defeated two professional Go players. The program had handicaps of 6 or 7 stones. Question for the Go players among us: Does a handicap of 6 stones mean that the starting board has 6 stones added for the weaker player, or that 6 is added to the final score? Rich

5 5

[math-fun] Isodiametric problem
by victor miller 16 Sep '10

16 Sep '10

A few days ago, at the AMS meeting, I saw a neat talk by Michael Mossinghoff about "isodiametic" problems -- e.g. Fix the diameter of a conv ex n-gon and ask for the ones with maximum perimeter. He reduced the problem to finding univariate polynomials whose non-zero coefficients alternate between +/- 1 and are divisible by a particular cyclotomic polynomial.. He was able to calculate all such up to about 500. Each such polynomial is compactly encoded by th length of the gaps between the non-zero terms. For small n almost all were periodic. He showed how a certain family of periodic constrctions give solutions, but as n got bigger the "sporadic" ones swamped them. He conjectued that these are eventually all of them. He had lots of pictures. The paper is not available yet. Victor

7 9

[math-fun] Symplectic apoplexy
by Fred lunnon 28 Feb '10

28 Feb '10

Thought my embryonic GA glossary could do with mentioning the symplectic group. Bad decision. Turns out there are several ... but for now, I'm just interested in the real one: Sp(2n) sometimes, or less ambiguously, Sp(2n, R). Trying to get a handle on this beast, I scratched around for a matrix representation, or better still an algebra along the lines of the Clifford algebras for the Spin groups PSO(p,q) etc. Kick off with the symplectic plane SP(2), defined as 2x2 matrices M such that M' K M = K, where M' denotes transpose, and K = [[1,0],[0,-1]] is the canonical skew-symmetric matrix. [Why transpose rather than inverse? And shouldn't there be a quotient by scalar matrices in there somewhere? Never mind, press on ...] In Wikipedia there lurks following linear basis: I = [[1,0],[0,1]], X = [[1,1],[0,1]], Y = [[1,0],[1,1]]. OK, it is a basis --- every matrix M = a I + b X + c Y preserves K, and it has the correct dimension (2n+1)n = 3. [Nice --- tho' it's not obvious to me why a basis should exist at all ...] But the corresponding algebra is not very enticing: the relations are x x = 2 x - 1, y y = 2 y - 1, x y + y x = 2 x + 2 y - 1 and I can't see how to reduce x y at all. Instead, here's a much nicer presentation: take X = [[1,-1],[1,0]], Y = [[0,1],[-1,1]] = -X^2, I = [[1,0],[0,1]] = X^6; now the algebra becomes x x = -y, y y = -x, x y = 1. Fired up by this success, I proceed to n = 2 --- and hit the buffers. Is there an analogous basis of 5 matrices for Sp(4)? I can't see how to construct one at all, let alone one with nice symmetry. So before I waste any more time re-inventing the wheel, would somebody out there like to shoot my fox for me (or maybe just run over it)? Fred Lunnon

1 3

Re: [math-fun] What is the name of [mod 9 digitsum]
by Dan Asimov 26 Feb '10

26 Feb '10

Christoph wrote: << Dan wrote: << Besides "digital root", it's also known as the remainder mod 9. >> Looking at the OEIS sequence that Neil mailed, I just recognized it is not as simple, since 0 is not a regular digital root (except for 0 itself). For non-zero multiples of 9 the digital root is 9. >> You are right, of course. For positive numbers that are multiples of 9 it is the remainder mod 9 (i.e., 0) plus 9. << I remember that Martin Gardner has some nice magic tricks based on the digital root in his 1956 book "Mathematics, Magic and Mystery" (Dover), ("Mathematik und Magie", Dumont in German). At least as boy I enjoyed them. :) >> Yes, this is the first Martin Gardner book I found (at age 8) and I loved it. --Dan ________________________________________________________________________________________ "Outside of a dog, a book is man's best friend. Inside of a dog, it's too dark to read." --Groucho Marx

2 1

Re: [math-fun] What is the name of [mod 9 digitsum]
by Dan Asimov 26 Feb '10

26 Feb '10

Eric wrote: << Does the operation going from 178 to 7 have a name (other than "modulus 9 digitsum")? >> Besides "digital root", it's also known as the remainder mod 9. --Dan ________________________________________________________________________________________ "Outside of a dog, a book is man's best friend. Inside of a dog, it's too dark to read." --Groucho Marx

2 1

Re: [math-fun] What is the name of [mod 9 digitsum]
by N. J. A. Sloane 26 Feb '10

26 Feb '10

Eric, maybe you have heard of the OEIS? The OEIS is designed to identify a sequence of numbers! You would find this: %I A010888 %S A010888 0,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7, %T A010888 8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6, %U A010888 7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5,6,7,8,9,1,2,3,4,5 %N A010888 Digital root of n (repeatedly add digits until reach a single digit). .... Cheers! Neil

2 2

Re: [math-fun] Correction Re: parametrizing the Koch snowflake curve
by Dan Asimov 25 Feb '10

25 Feb '10

Now that I'm not rushing to post this, I'm pretty sure it should be S(t) = T_[4t](S({4t}) (but at this point I can no longer trust anything I say). I wrote: << S({4t}) = T_[4t](S(t)) ________________________________________________________________________________________ "Outside of a dog, a book is man's best friend. Inside of a dog, it's too dark to read." --Groucho Marx

1 0