try adjusting the tracking, that usually helps, also the hight of the tone arm, either that or change the whole setup :-) that is ofcourse only if its a problem with all your vinyl and just not the klf stuff the problem could also be with the four pins in the tone arm, dismantle the headshell from the tone arm and clean them with some alcohol :-)
I tested it with a small snippet of 3PM, converted it to mono and 1:1 stereo, and when I record them back into CEP, both recordings are 100% identical on both channels.
Still the question is wether this difference in channel volumes (not too much, but clearly audible and visible) is intentional or a result of its medium. Maybe it's the sheer g-force that pins the needle of the turntable more on the right side of the groove track... ;-)
..::// Thomas
_______________________________________________ KLF mailing list KLF@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/klf Report list abuse to list-abuse at studio-nibble.com