Tim Wegner wrote:
Bad news, same problem. It exists not only with the new virtual screen, but with any svga mode. textsafe=save does not help. However the F3 mode (320x200) is OK.
The symptoms are: generate default mandelbrot, then press <Esc>. The screen is garbled. Followed by garbage. Looks like some address wrong. You can see the correct data, but each line rolls around so the left side of the screen shows on the right. Also, the top of the screen does not show, and there is garbage at the bottom.
However pressing a video key (e.g. F3) allows one to draw another fractal, then pressing ESC gives the correct screen.
Try it again, please. There was a small modification made to make the screen prompts wider, which I've removed. Don't knkow why it works okay on my laptop and not at all on some other machines. I suspect the video modes above F3 might still be broke. Jonathan