Dear Friends,

 

I have been doing a lot of work on ManpWIN. Let me know if there is any interest. I’m happy to share source code if anyone is interested. The basic engine is based on Winfract.

 

http://www.deleeuw.com.au/download/SetupManpWIN.exe

 

Regards,

 

Paul.

 

----------------------------------------------------------
Paul de Leeuw Computers     NSW Central Coast, Australia
Email:                             pdeleeuw@deleeuw.com.au
www:                           <http://www.deleeuw.com.au>
ABN                                         72 360 822 562
----------------------------------------------------------

 

---

From: fractdev-bounces@mailman.xmission.com [mailto:fractdev-bounces@mailman.xmission.com] On Behalf Of Timothy Wegner
Sent: Friday, 7 March 2014 10:17 AM
To: Fractint and General Fractals Discussion; fractdev@mailman.xmission.com
Subject: Re: [Fractdev] [Fractint] Fractint under FREEDOS from USB drive

 

Occurs to me that this thread is more appropriate for the fractdev mailing list than fractint, so I will crosspost this to fractdev, then follow up there. I'm not saying that there shouldn't be ANY discussion of booting fractint from USB here, but if we get into lengthy discussions of arcane hardware issues (which I certainly enjoy), we may be getting a little off topic for this list.  We'll see how it goes. Anyone interested in sharing technical  information about running fractint on various platforms please join me in Fractdev. When I have something to share with end users, I will report here. Please understand I am not trying to shush anyone up, so if you'd like to see this discussion here, by all means say so. 

 

 Paul wrote:

 

I have found that it depends on the level of USB that you have installed on the computer, as well as the pluggin drive itself.  Some thumb drives work on some of my older machines, and some do not.

 

The puzzle is that I have three self-built machines of different ages that all have Gigabyte motherboards, AMD chips, and Award bioses. The oldest and youngest boot USB and CF, but the middle machine does not. The point is that these are not dissimilar, just different ages. Doesn't worry me that one doesn't work, I guess I am just compulsive. I'll compare the bios settings, and see if there's some setting causing different behavior. I really want to try the middle machine because it is the only one with NVIDIA (non-motherboard) graphics, which some folks have suggested might have better VESA support.

 

I do have a plan B. I found a 2.5 inch 80gb SATA drive in my junk drawer that came out of a Dell E1505  Laptop when I upgraded the drive. I'll blow away the XP on it and format with FreeDOS. That should certainly work in a dual boot configuration on the middle machine.

 

Followups to fractdev please.

 

Tim

_______________________________________________
Fractdev mailing list
Fractdev@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/fractdev