Backstage - AACR2 vs RDA Access Points
We wish to bring to your attention a probable issue that you may face when it comes to matching or not matching your AACR2 access points against RDA authorities. For instance, say you have an AACR2 bib record with the following access points: 110 $a United States. $b Dept. of the Defense. 710 $a United States. $b Dept. of Communications. 710 $a United States. $b Dept. of the Defense. The 110 & 2nd 710 will match [n 79021946] and flip to: 110 $a United States. $b Department of Defense. 710 $a United States. $b Department of Defense. But the 1st 710 will not find a match and remains as-is: 710 $a United States. $b Dept. of Communications. So your processed (AACR2) record ends up looking like this: 110 $a United States. $b Department of Defense. 710 $a United States. $b Dept. of Communications. 710 $a United States. $b Department of Defense. This is the scenario that our clients are facing when Step 5 of the RDA Profile (link <http://ac.bslw.com/community/wiki/index.php5/RDA_5.0> ) hasn't been filled out. RDA Step 5 helps to prepare access points for better matching against RDA authorities. And it has this failsafe included: in the event of a non-match against RDA authorities, the heading itself still follows RDA cataloging standards. Of course, if your Library is not quite ready to embrace RDA and the changes afoot it may not make sense at this time to perform these kinds of changes to your access points. At the very least, we wanted to point out this potential issue and let you know that we have a remedy in place ready to go when you need it. For more information, please feel free to contact your project managers or myself at anytime: Nate Cothran nate@bslw.com Judy Archer jarcher@bslw.com Stephanie Hansen shansen@bslw.com Nate Cothran Vice President, Automation Services 25 East 1700 South Provo, Utah 84606 Phone: +1.800.288.1265, ext. 697 Direct: +1.801.342.5697 nate@bslw.com <mailto:nate@bslw.com?subject=Automation%20Services%20-%20Inquiry> * www.bslw.com <http://www.bslw.com>
Nate, Did Palos Verdes fill out step 5 of the RDA Profile? We are doing RDA in our system so these changes are acceptable to us. Thanks, Mary On Thu, Aug 1, 2013 at 2:33 PM, Nate Cothran <nate@bslw.com> wrote:
We wish to bring to your attention a probable issue that you may face when it comes to matching or not matching your AACR2 access points against RDA authorities.****
** **
For instance, say you have an AACR2 bib record with the following access points:****
110 $a United States. $b Dept. of the Defense.****
710 $a United States. $b Dept. of Communications.****
710 $a United States. $b Dept. of the Defense.****
** **
The 110 & 2nd 710 will match [n 79021946] and flip to:****
110 $a United States. $b Department of Defense.****
710 $a United States. $b Department of Defense.****
** **
But the 1st 710 will not find a match and remains as-is:****
710 $a United States. $b Dept. of Communications.****
** **
So your processed (AACR2) record ends up looking like this:****
110 $a United States. $b Department of Defense.****
710 $a United States. $b Dept. of Communications.****
710 $a United States. $b Department of Defense.****
** **
This is the scenario that our clients are facing when Step 5 of the RDA Profile (link <http://ac.bslw.com/community/wiki/index.php5/RDA_5.0>) hasn’t been filled out. RDA Step 5 helps to prepare access points for better matching against RDA authorities. And it has this failsafe included: in the event of a non-match against RDA authorities, the heading itself still follows RDA cataloging standards.****
** **
Of course, if your Library is not quite ready to embrace RDA and the changes afoot it may not make sense at this time to perform these kinds of changes to your access points.****
** **
At the very least, we wanted to point out this potential issue and let you know that we have a remedy in place ready to go when you need it.****
** **
For more information, please feel free to contact your project managers or myself at anytime:****
** **
Nate Cothran****
nate@bslw.com****
Judy Archer****
jarcher@bslw.com****
Stephanie Hansen****
shansen@bslw.com****
** **
** **
** **
[image: Backstage Library Works] [image: You be the star. We'll stay backstage.]****
*Nate Cothran*****
*Vice President, Automation Services*****
25 East 1700 South****
Provo, Utah 84606****
Phone: +1.800.288.1265, ext. 697****
Direct: +1.801.342.5697****
nate@bslw.com <nate@bslw.com?subject=Automation%20Services%20-%20Inquiry>• *www.bslw.com* ****
** **
_______________________________________________ BSLWAC mailing list BSLWAC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/bslwac
-- *Mary Cohen Technical Services Dept. Head Palos Verdes Library District 701 Silver Spur Rd. Rolling Hills Estates, CA 90274 310-921-7519 Fax: 310-541-6807 *
participants (2)
-
Mary Cohen -
Nate Cothran